FAST Install Time of ONLY 2 weeks

Dock Company
Home
Menu
  • Spider Netting
  • Roll Up Shades
  • Fixed Lath Shades
  • Automatic Sun Shades
  • Dock Acessories
  • Pictures
  • Dock Company Apparel
  • Installation
  • Shipping
Dock Company
Home
Menu
  • Spider Netting
  • Roll Up Shades
  • Fixed Lath Shades
  • Automatic Sun Shades
  • Dock Acessories
  • Pictures
  • Dock Company Apparel
  • Installation
  • Shipping
More
  • Home
  • Menu
    • Spider Netting
    • Roll Up Shades
    • Fixed Lath Shades
    • Automatic Sun Shades
    • Dock Acessories
    • Pictures
    • Dock Company Apparel
    • Installation
    • Shipping
  • Home
  • Menu
    • Spider Netting
    • Roll Up Shades
    • Fixed Lath Shades
    • Automatic Sun Shades
    • Dock Acessories
    • Pictures
    • Dock Company Apparel
    • Installation
    • Shipping

Installation can be easy!

Roll Up Measurement Video

Here is a detailed video on how to accurately measure for your roll up shades. 

Roll-Up Sun Shade Installation Video

Not local to Lake of the Ozarks? Learn to install yourself!

Materials you need to install Roll Up Shades

Drill

1/4 inch drill bit

Level

Pliers

Wrench

5/16 drill bit

How to Measure for Spider Netting

Measuring for spider netting is easy! Measure "inside to inside" meaning you measure from the inside of one post to the post at the end of your netting, then repeat for width. Make sure to measure all four sides to make sure one end is not smaller than the other, if they are uneven, please include all four measurements. If your netting will not be flat, measure the middle height and the two end heights so that we can account for the curve. 

Spider Netting Installation

A detailed installation video for our spider netting. 

Materials you need to install Spider Netting

Drill

1/4 inch metal drill bit

Small / Medium adjustable wrench

(optional) 10mm socket to tighten cable clamp

(optional) vice grip to hold cable in place while you attach clamps

Scissors to cut tails off cable ties

Fixed Shades

Fixed Sun Shade Installation

For our fixed shade installation, please watch the spider netting installation video.


Installation of the cable system that serves as the anchor for our fixed shades is functionally identical to that of our spider netting. Please reference our video on spider netting installation for a guide on how to set your i bolts, thread and tighten your cable, and hang your fixed shade. For a proper fit on your shade place your i bolts 3 inches farther apart than the height of your shade. This will allow room for your carabiners and ties to stretch the shade properly and keep it from being loose and flap in the wind. 

Materials you need to install Fixed Shades

Drill

1/4 inch metal drill bit

Small / Medium adjustable wrench

(optional) 10mm socket to tighten cable clamp

(optional) vice grip to hold cable in place while you attach clamps

Scissors to cut tails off cable ties

Copyright © 2024 Dock Company - All Rights Reserved.

Powered by GoDaddy

This website uses cookies.

We use cookies to analyze website traffic and optimize your website experience. By accepting our use of cookies, your data will be aggregated with all other user data.

Accept